FLOOD-GARD® bearing isolators offer the ultimate sealing solution for aggressive, flooded lubrication environments. With its patent pending IP66 design, FLOOD-GARD® is a revolutionary seal that combines improved safety and overall process efficiency with cost savings through extended equipment and bearing life.
BENEFITS
-
Patented seal design provides bearing protection even in the most challenging flooded environments, extending the life of rotating equipment
-
Rugged, unitized construction for ease of installation
-
IP66 in most common design configurations
-
Available in standard and small cross section configurations
-
Substantially reduced installation time - NO ARBOR PRESS NEEDED
-
No metal-to-metal contact between stator and rotor
-
Handles up to .015" of misalignment
TYPICAL APPLICATION
-
Rotating equipment such as pumps, motors, gearboxes with flooded internal lubricant levels (levels which are above the bottom of the shaft)
DESIGN PARAMETERS
-
Temperature: -22ºF (-30ºC) to 400ºF (204ºC)
-
Shaft to bore misalignment: ±0.015” (0.38 mm)
-
Axial motion to ±0.010” (0.25 mm)
-
Surface speed: to 3,000 FPM Max. (15.24 m/s)
-
Pressure: 7 psi intenal pressure
