Zu Hauptinhalt springen

Search form

Search

English
Deutsch
Español
Français
简体中文

Search form

Search

Produkte
Dienstleistungen
Märkte
Technik
Firma
Kontakt

You are here

Startseite » Technik

Häufig gestellte Fragen (FAQ)

What is Controlled Density? What are Controlled Density Gaskets?
Which gaskets meet USP (United States Pharmacopeia) requirements?
Does Garlock have gaskets that meet USDA requirements?
Does the use of Traced Lines (Heat Traced) affect the gasketed joint?
Does Garlock recommend the use of torques wrenches to tighten the flange bolts?
What thickness is best for a gasket?
Where are the values for Thermal Conductivity?
What gaskets can I use for Steam? What is superheated steam?
How do I fill a large gap in flanges? Can I stack gaskets? (Spacers in Flanges)
What is the recommended Shelf Life for gaskets?
What is Garlock's position on the Reuse of Gaskets?
Which gaskets are recommended for Refrigerants?
Does Garlock have data on Radiation Resistance?
What problems can be caused by Pressure Spikes?
What does it mean if I am given the pH of the solution?
What gaskets are recommended for Oxygen (O2) Service?
What gaskets can I use for strong Oxidizers?
Does Garlock have any gaskets that are approved to the NSF 61 for Drinking Water?
What are the best gaskets for Monomers?
What is a Modulus of Elasticity?
Does Garlock have any gaskets approved to Military Specifications?
Where can I find "M" and "Y" Values for Flange Design?
How do I obtain Leachable Levels (chemical) for gaskets?
What are the appropriate gaskets for Jet Fuels?
Which gaskets work in Flange Isolation Kits?
Does Garlock have Installation Instructions?
What is Gasohol?
What do I need to be concerned with when Gaskets are installed in Grooves or recesses?
What are Gasket Constants?
What is a Full Face Gasket?
Has Garlock tested gaskets against any Fuel Additives?
What is the correct Flange Surface Finish?
How is a gasket selection affected by the flange type?
Which gaskets have passed a fire test?
Which gaskets can I use for FDA applications?
What's the best way to control Emissions from gasketed joints?
Does Garlock have Dielectric Breakdown values for gaskets?
Why do customers sometimes request gaskets that are electrically insulating?
Which gaskets are best for Cryogenic Service?
What is the Crush Strength of Garlock Gaskets?
How does the available Compressive Stress affect gasket performance?
How much will my gasket Compress?
What gaskets are recommended for Chlorine Service?
How do I get my gaskets to pass a Bubble Tests?
What gaskets can be used with Aviation Gasoline?
Can I add a coating or anti-seize to my gaskets?
Which gaskets are ABS Type approved?
What Is ABS?
Does Garlock have gaskets that meet 3A?

Entwicklungswerkzeuge

Hilfsmittel zur Bestimmung der richtigen Lösung für Ihre Anwendung.

Lesen Sie weiter

Werbeprodukte
Haftungsausschluss
Impressum / Rechtliche Hinweise

© 2009-2024 GARLOCK, AN ENPRO (NYSE: NPO) COMPANY.
ALL RIGHTS RESERVED.