BLUE-GARD^® Style 3700

• Excellent sealability
• Improved torque retention
• Drastically lowered emissions levels
• Cuts operational costs through reduced waste, maintenance, stocked inventory, fluid loss, and energy consumption

• Available in sheet or cut gasket form
• Aramid fibers, fillers and an EPDM rubber binder
• Light grey color
• Min. Temperature:        -100°F             -73°C
• Max. Temperature:        700°F              371°C
• Continuous Max:        400°F             205°C
• Max Pressure:        1200 PSI             83 bar
• Maximum PxT 1/16:    350,000 (°F x PSIG)     12,000 bar x °C
• Maximum PxT 1/8:        250,000 (°F x PSIG)     8,600 bar x °C

• Water
• Saturated steam*
• Inert gases

*This style is not the preferred choice for steam service, but is successful when adequately compressed. Minimum recommended assembly stress = 4,800 psi. Preferred assembly stress = 6,000-10,000 psi. Gasket thickness of 1/16" strongly preferred. Retorque the bolts/studs prior to pressurizing the assembly. For saturated steam above 150psig or superheated steam, consult Garlock Engineering.